-
Distillate Hydrodesulfurization Catalyst For Pyrolysis Gasline
1.Distillate hydrodesulfurization catalyst for pyrolysis gasline is applied to the second - stage hydrodesulfurization of pyrolysis gasoline.
2. The catalyst with nickel molybdenum as the... -
Heavy Oil Hydrodesulfurization Catalyst
1.Heavy oil hydrodesulfurization catalyst is also a catalyst for denitrification of heavy oil.
2.It is suitable for the hydrotreating process of heavy oil and other low-quality... -
Sulfur Tolerant Shift Catalyst
1.Sulfur tolerant shift catalyst has good shift activity at low temperature and low sulfur content.
2.Suitable for CO shift process with coal, refinery coke or residual oil etc.
3.It... -
Ammonia Decomposition Catalyst
1.Ammonia decomposition catalyst is suitable for the van-type one-stage reformer and heat-exchange reformer in various processes in the synthesis of ammonia, methanol and hydrogen production from...
-
Nickel Catalyst For Ammonia Dissociation
1.Nickel catalyst for ammonia dissociation is with magnesium oxide as carrier and metal nickel as active component.
2.The reaction takes place on a Nickel catalyst at a temperature of about... -
FC–14 Hydrocracking Catalyst For Prolific Diesel And Medium Oil
FC – 14 catalyst is a highly active hydrocracking catalyst that was developed by Fushun Petrochemical Research Institute.
-
RC Series Continuous Reforming Catalyst
RC series catalyst is high selectivity, low carbon deposition rate continuous reforming catalyst that developed by petrochemical research institute developed in recent years. RC011 is low platinum...
-
MLC-500 Catalyst
MLC-500 catalyst has the characteristics of strong cracking ability of heavy oil, good hydrothermal stability, strong resistance of heavy metal pollution, high activity retention and good...
-
CARC Catalyst
CARC catalyst has characteristics as below:
● Increase channel of substrate and pore volume
● Prompt inferior cracking of macromolecular hydrocarbon -
Catalyst Auxiliary for FCC
1.Catalyst auxiliary for FCC is based on magnesium and alumina 2.Introducing elements to promote the absorption of sulfur oxide 3.Made with a unique preparation process
-
Reactivated Catalytic Cracking Catalyst
1.Reactivated catalytic cracking catalyst is to recover the activity 2.Using the inorganic organic coupling tech to reactivate spent catalyst 3.The process: the use of acid,alkali solution...
-
GCR Continuous Refroming Catalyst
GCR is continuous reforming catalyst with high active, high hydrothermal stability. The characteristic is activity increased significantly and 6-8℃ higher than previous generation catalyst.
Designed to synthesize methanol at the lowest possible cost and with the lowest possible impact on the environment, the process relies on our ultra-efficient tubular boiling water reactor (BWR)...
Methanol is an important platform molecule for chemicals and energy. Not only is it a C1 building block for base chemicals (e.g. formaldehyde), but also a...
Methanol synthesis catalyst Methanol with the chemical formula CH3OH is an alcohol which basically produced from natural gas. Methanol is produced by the catalytic reaction of...
Methanol is a very important product and intermediate in the chemical industry that is prepared by a catalytic process from synthetic gas. Although more than three decades of traditional copper-based...
Nov 26, 2019 · Abstract. Technological approaches which enable the effective utilization of CO 2 for manufacturing value-added chemicals and fuels can help to solve environmental problems...
Jun 17, 2019 · This catalyst has remained essentially the same over the succeeding years, but with improved sintering resistance and including some additives. 5 The ICI business was taken over by...












