Shandong Avant New Material Technology Co., Ltd

enLanguage
Nickel Catalyst For Ammonia Dissociation

Nickel Catalyst For Ammonia Dissociation

1.Nickel catalyst for ammonia dissociation is with magnesium oxide as carrier and metal nickel as active component.
2.The reaction takes place on a Nickel catalyst at a temperature of about 1,000° C and a space velocity of about 1,000 h-1.
3.Nickel catalyst is suitable for coke oven gas purification process.

Product Introduction

 

Nickel catalyst for ammonia dissociation is with magnesium oxide as carrier and metal nickel as active component.The catalyst has good deamination activity,high crushing strength,good coking and heat resistance,convenient loading and long service life.

Nickel catalyst for ammonia dissociation is suitable for coke oven gas purification process.Small amount of toxic gases such as NH3 and HCN in coke oven gas are decomposed into N2,CO2 and H2 in the ammonia decomposition furnace,which remove harmful gases,solve environmental pollution and slow down the corrosion of process equipment.

Nickel Catalyst For Ammonia Dissociation

 

Physical Properties and Activity Indicators

 

Type

AM-TA-330

AM-TA-19

AM-TA-117

Apperance

Gray black ring

Gray black rib ring of nine

Gray black rib ring of five

Size,mm

Φ19 x 19 x 4.0

Φ32 x 28 x 11

Φ16 x 16x 4.5

Ni,wt.%,≥

6

6

6

Crushing Strength,N/Gr,≥

1000

1500

500

Bulk Density,kg/l

1.2-1.3

1.0-1.1

1.0-1.1

Catalytic ammonia decomposition process

 

Nickel Catalyst For Ammonia Dissociation-2

Decomposition of ammonia and hydrogen cyanide is thermal cracking in a reducing atmosphere,which can not only prevent hydrogen sulfide from participating in the reaction,but also avoid NOx formation.In this process, the ammonia vapor with a small amount of hydrogen sulfide is sent to the ammonia decomposition furnace through the AS cycle washing system.NH3 and HCN with nickel catalysts for ammonia dissociation are decomposed.The decomposed gas is sent to the waste heat boiler to generate steam.The cooled decomposed gas is then cooled by the second direct cooling system (the calorific value is about 2900kJ/m3) and mixed into the coke oven gas.A separate deamination process is adopted, the ammonia vapor at the top of the tower after washing ammonia and steaming ammonia is passed through a sub-contractor and then enters an ammonia decomposition device for decomposition.

The process of catalytic ammonia decomposition for nickel catalyst for ammonia dissociationhas the advantages of economical and practical, low cost, tail gas can be mixed with coke oven gas and no secondary pollution.

Normal Process conditions

 

Maximum Operation Temperature,℃

1400

Operation Pressure,MPa

0-2

Space Velocity,h-

1000-3000

Ammonia Decomposition Rate,%,≥

99

 

 Packing of Nickel catalyst for ammonia dissociation:Iron drum,wooden drum and platic drum with sealed packaging

 FAQ:

Q1: Which products are mainly produced in your company?

Shandong Avant New Material Technology Co., Ltd. is a well-known catalyst manufacturer, supplier and service provider in China. Its wholly-owned subsidiary, Shandong Kelts Catalyst Co., Ltd. is focusing on technical services such as catalyst product technology design, research and development, device optimization, process optimization, joint development and customization etc.

 

We have established a number of production bases in Zibo, Qingdao, Liaoning, Ningbo, Ningxia,Gansu and other regions, which focus on the production,research and development of oil refining catalysts, chemical catalysts,coal chemical catalysts, polyolefin catalysts, catalytic and adsorption materials.

 

We own a powerful technical team of 5 doctoral supervisors and 17 engineers,

who are mainly respensible for the R&D and guide production in six kinds of our company’s catalyst fields.Production preparation services and analysis evaluation experiment services are provided according to your requirements. Customization, joint development, process and device optimization are also becoming our cooperation method with you.


202211121500278952278:+86-13884622769

202211121500271395143:emily@sd-avant.com

Hot Tags: nickel catalyst for ammonia dissociation, China, manufacturers, suppliers, factory, wholesale, price, Nickel Based Catalyst For Chemical Industries, COKC Series Catalyst, GOR Catalyst, CARC Catalyst, Reactivated FCC Catalyst, Catalytic Cracking Catalyst for Petrochemical

You Might Also Like

(0/10)

clearall