-
Reactivated FCC Catalyst
1.The using efficiency of reactivated FCC Catalyst reaches 80%-90% 2.It can meet the requirements for the smooth operation of the unit 3.Four processes:preparation of resurrection...
-
High Temperature Desulfurizers
1.High temperature type of ZnO desulfurizer.
2.High activity and reaction rate.
3.High saturated sulfur capacity and breakthrough sulfur capacity. -
Methanol Low Pressure Synthesis Catalyst For Coal Gas
1.Methanol low pressure synthesis catalyst for coal gas is suitable for methanol synthesis process with coal gas, natural gas, coke oven gas feedstock.
2.It is suitable for various type of... -
Copper based catalyst used for vegetable oil
1. It's high activity and selectivity.
2. Easy to filter of copper based catalyst used for vegetable oil.
3. Safe and simple handling. -
Refining catalysts with high activity and stability
1. Refining catalysts with high activity and stability(AM-DHT-7) that developed by FRIPP.
2. It is the latest Mo-Co type catalyst of ultra deep hydrogenation for diesel desulfurization.... -
Non-hydrogen Dewaxing Catalyst
1. On the basis of the original catalyst, the non-hydrogen dewaxing catalyst is more suitable for naphthenic straight-run gasoline;
2. Using ZSM zeolite as the carrier;
3. It has... -
Solid Phosphoric Acid Catalyst
1. Solid phosphoric acid catalyst is mainly used for the oligomerization of propylene to produce nonene, dodecene, and carbon tetraolefins;
2. Stacking to produce high-octane gasoline;... -
Ammonia Decomposition Catalyst
1.Ammonia decomposition catalyst is suitable for the van-type one-stage reformer and heat-exchange reformer in various processes in the synthesis of ammonia, methanol and hydrogen production from...
-
Semi Regenerative Reforming Catalysts
1.Platinum and rhenium are the basic active metal components of semi-regenerative reforming catalysts.
2.Semi regenerative reforming catalysts are an effective way to improve the catalyst... -
RSC-2006 Catalyst
RSC-2006 is a catalytic cracking catalyst for reducing the yield of oil slurry and coke, and improving the yield of light oil.
-
COR Series Catalyst
COR series catalyst has characteristics as below:
● High activity
● Good strength
● Realize the selectivity of hydrogen transfer reaction
● Guarantee the reasonable... -
RAG Series Catalyst For ARGG Process
ARGG technology is developed by Petrochemical Research Institute, use atmospheric residuum as raw material for max production of liquefied petroleum gas(LPG) and high octane gasoline, particularly...
Dec 25, 2020 · This work focuses on the reactivation of fluid catalytic cracking (FCC) catalyst via mixed acid to leach out pollutant Ni and Fe oxides and reserve acidic sites provider...
HC RL Reactivated FCC C atalyst. Comparing with the spent catalyst before treatment, the activity will reach 72-75%, the specific surface is increased by 60-80%, reaching over 170 ㎡ /g, and the metal...
Dec 25, 2020 · As shown in Fig. 6, in the range of 0.75–1.5 nm, the pore width of reactivated, fresh and spent catalysts is basically the same, and the pore volume of reactivated...
HC RL Reactivated FCC C atalyst. Comparing with the spent catalyst before treatment, the activity will reach 72-75%, the specific surface is increased by 60-80%, reaching over 170 ㎡...
The use efficiency of HCRH Reactivated FCC Catalyst reaches 80%-90% of the catalytic cracking catalyst (new agent).It can meet the requirements for the smooth operation of the catalytic cracking...
Sep 17, 2008 · in fcc processes, regeneration is achieved by combustion with air and, consequently, all the relevant deactivation phenomena taking place during catalytic cracking can be grouped in...












