China MTBE Etherification Strong Acid Catalyst Manufacturers Factory Suppliers

1. MTBE Etherification strong acid catalyst is macroporous styrene series strong acid cation exchange resin;
2. It has suitable pore structure, specific surface area and catalytic...

1.Detoxication Deoxidants for Sulfur Tolerant Shift Catalysts are acting as a protectant.
2.Suitable for kinds of Sulfur Tolerant Shift process.
3.It has its own shift activity.

1.Tiania based sulfur recovery catalysts can promote hydrolysis rate of organic sulfur.
2.It can be suitable for catalytic oxidation sulfur recovery process.
3.It has stable activity...

Characteristics of hydrogenation catalyst
● High activity and stability
● High efficiency and working life
● Using by regeneration

1.Sulfur tolerant shift catalyst has good shift activity at low temperature and low sulfur content.
2.Suitable for CO shift process with coal, refinery coke or residual oil etc.
3.It...

1.It is component of Mo-Co-Ni three yuan active components, alumina and titanium oxide compound carriers.
2.Hydrogenation catalysts for purifying H2 production feedstock have excellent...

1.Naphtha reforming catalysts can be divided into semi-regenerative reforming and continuous regenerative reforming kind.
2.It has high efficiency, selectivity, specificity and a certain...

FC – 14 catalyst is a highly active hydrocracking catalyst that was developed by Fushun Petrochemical Research Institute.

RFS09 sulfur transfer agent is a catalytic cracking agent developed based on a variety of technology platforms to efficiently reduce the sulfur content in recycled flue gas.

1.Molecular sieve for FCC catalysts is made from NaY as raw material 2.Production process:rare earth treatment,hydrothermal superstability 3.Y type is a microporous crystalline material with a...

1.Catalyst auxisiary for reducing the coke is made of active carriers 2.This will be injected into the regenerators together with the catalysts. 3.It can reduce the coke and hydrogen yields in...

1.​Reactivated catalytic cracking catalyst is to recover the activity 2.Using the inorganic organic coupling tech to reactivate spent catalyst 3.The process: the use of acid,alkali solution...