China Hydrocracking Catalyst For Medium Oil Manufacturers Factory Suppliers

Hydrocracking Catalyst For Medium Oil has characteristics as below:
● High activity
● High selectivity
● Good stability
● Good sensitivity

1.Distillate hydrodesulfurization catalyst for pyrolysis gasline is applied to the second - stage hydrodesulfurization of pyrolysis gasoline.
2. The catalyst with nickel molybdenum as the...

1. The steam reformer is the heart of the entire hydrogen production process.
2. The key factor in the conversion process is the hydrocarbon steam pre reforming catalysts.
3. Under high...

1. Naphtha hydrogenation catalyst usually uses a fixed bed hydrogenation;
2. Naphtha hydrogenation catalyst can not only reduce the sulfur and olefin content in the naphtha at the same...

1.Supported type nickel catalyst is a kind of steam reforming catalyst
2.It is nickel oxide dispersed on an alpha alumina or calcium aluminate support
3.It is used to produce in the...

1. The PRT semi-regenerative reforming catalyst has excellent characteristics such as high carrier purity, suitable pore distribution, good strength and strong chlorine holding capacity;
2....

1. The main purpose of sulfur recovery tail gas hydrogenation SCOT catalyst is to reduce the total sulfur emission of sulfur tail gas stack;
2. It has large surface area and pore volume,...

PRT is a new generation of more metal strip half regeneration reforming catalyst that developed by petrochemical research institute, including PRT PRT - A - B, PRT - C, PRT – D etc which carrier...

GOR-Ⅱolefin reducing catalyst enhances the ability of olefin reducing, increases hydrothermal stability, improves coke selectivity and heavy oil cracking ability by modification of main active...

CRSC is a kind of catalyst that developed based on the technology of silicon substrate platform to reduce slurry oil and coke yield.

CARC catalyst has characteristics as below:
● Increase channel of substrate and pore volume
● Prompt inferior cracking of macromolecular hydrocarbon

1.Catalyst auxiliary for FCC is based on magnesium and alumina 2.Introducing elements to promote the absorption of sulfur oxide 3.Made with a unique preparation process