-
3A Molecular Sieve For Drying Natural Gas
1.The 3A molecular sieve has uniform microporous structure and has preferential adsorption capacity for polar molecules and unsaturated molecules.
2.It has high adsorption capacity, strong... -
Molecular Sieve Desiccant
1.Molecular sieve desiccant is an adsorption material with uniform pores inside, which is widely used in the process of natural gas dehydration.
2.It is an aluminosilicate crystal with many... -
4A Zeolite Molecular Sieve
1.4A Zeolite molecular sieve is a crystalline metal silicoaluminate which has been activated for adsorption by removing its hydrated water.
2.A highly porous adsorbent is formed during the... -
13X Zeolite Molecular Sieve For PSA Device
1.13X zeolite molecular sieve for PSA device can adsorb any molecule larger than 3.64 A but smaller than 10 A
2.It can be used for catalyst co-carrier, co-adsorption of water and carbon... -
Regeneration Molecular Sieve
1.Regeneration molecular sieve is highly absorbent, allowing only molecules with diameters smaller than the pore size to enter, while the other two are not uniform pore size
2.In the process... -
3A Molecular Sieve
1.3A molecular sieve is an alkali metal aluminosilicate, also known as 3A zeolite molecular sieve.
2.It has a relatively large industrial role, and has the characteristics of fast adsorption... -
4A Molecular Sieve
1.4A molecular sieve is a type A. The cation is sodium ion and the pore diameter is 4A.
2.It mainly adsorbs molecules with molecular sieve diameter less than 4A, including water, carbon... -
5A Molecular Sieve
1.The effective pore size of 5A molecular sieve is between the minimum projected diameters of normal alkane molecules and non-normal alkane molecules.
2.It's adsorption and separation of... -
Carbon Silica Molecular Sieve
1.Carbon molecular sieve mainly composed of the element carbon, the appearance of black columnar solid.
2.It has high nitrogen production capacity, high nitrogen recovery rate and long... -
Air Depth Drying Molecular Sieve
1.The air deep separation and drying molecular sieve(A type molecular sieve) is mainly used for the deep separation and drying of gas, and has a wide range of applications in the gas drying...
-
Molecular Sieve for Liquid Drying
1.The types of molecular sieves are mainly divided into: A type, X type according to their crystal structure.
2.It can withstand short-term high temperatures of 600-700 °C, but the... -
Molecular Sieve Dryer
1.Molecular sieve dryer is an alkali aluminosilicate, composed of water glass, sodium metaaluminate and caustic soda.
2.It is processed by a series of suitable production processes such as...
Regeneration of molecular sieve substrate is accomplished by taking a small amount of dry gas from the downstream side of the system, heating it to about 600 F, and pushing it through the saturated...
Advantages of Molecular Sieves: Very low dew point and water content can be obtained Btitdfl l f d hihBest suited for large volumes of gas under very high pressure Dehydration of very small...
Regeneration of molecular sieve substrate is accomplished by taking a small amount of dry gas from the downstream side of the system, heating it to about 600 F, and pushing it through the...
Purmol molecular sieve zeolite powder is an excellent moisture scavenger for polyurethane coatings, adhesives, sealants and elastomers. Purmol adsorbents are synthetic zeolites in powder form with a...
May 15, 2017 · Drying Media – Molecular Sieve 4A. CNG gas typically needs to be dried to a minimum -100 degrees F dew point. Depending on the climate this means that the gas has to contain less than...
After liquefaction, it has stricter requirements for moisture. JaLon Molecular Sieve for Natural Gas is widely used to dry natural gas to very low dew points. JaLon has developed a series of...












