-
CARC Catalyst
CARC catalyst has characteristics as below:
● Increase channel of substrate and pore volume
● Prompt inferior cracking of macromolecular hydrocarbon -
Hydrogen Peroxide Catalyst
1.Hydrogen peroxide catalyst is high activity, extended life, superior stability, and large pore volume.
2.It is excellent hydrothermal stability, high fatigue resistance, and strong acid... -
Diesel Non-hydrogen Depreciation Catalyst
1. Diesel non-hydrogen depreciation catalysts can be used in the production of gasoline and diesel oil from gas oil at atmospheric pressure in the vapor phase process;
2. It can also be... -
Nickel Based Catalyst
Characteristics of nickel based catalyst
● High activity
● Quick reaction and hydrogen adsorption
● High efficiency and selectivity -
Nickel Catalyst For Ammonia Dissociation
1.Nickel catalyst for ammonia dissociation is with magnesium oxide as carrier and metal nickel as active component.
2.The reaction takes place on a Nickel catalyst at a temperature of about... -
Naphtha Reforming Catalysts
1.Naphtha reforming catalysts can be divided into semi-regenerative reforming and continuous regenerative reforming kind.
2.It has high efficiency, selectivity, specificity and a certain... -
C4 C5 C6 Low Temperature Light Hydrocarbon Isomerization Catalyst
1. C4 C5 C6 Low temperature light hydrocarbon isomerization catalyst is prepared by using precious metal Pt supported on alumina chloride carrier;
2.It has the advantages of high... -
VRCC-1 Catalyst
VRCC-1 catalyst is suitable for processing high carbon residue raw oil, can deeply transform tower bottom oil, resist metal pollution, can improve liquid yield, improve coke selectivity.
-
RSC-2006 Catalyst
RSC-2006 is a catalytic cracking catalyst for reducing the yield of oil slurry and coke, and improving the yield of light oil.
-
COR Series Catalyst
COR series catalyst has characteristics as below:
● High activity
● Good strength
● Realize the selectivity of hydrogen transfer reaction
● Guarantee the reasonable... -
Catalyst Auxiliary for Improving the Propylene
1.Catalyst Auxiliary for Improving the Propylene is a solid co-catalyst 2.It significantly improve the yield of propylene and butene in FCC unit. 3.Using it can increase the octane of cracked...
-
Reactivated FCC Catalyst
1.The using efficiency of reactivated FCC Catalyst reaches 80%-90% 2.It can meet the requirements for the smooth operation of the unit 3.Four processes:preparation of resurrection...
China High Activity Stability CARC Catalyst LS-CARC-1 Direct Catalytic Cracking, Find details about China Fluid Catalytic Cracking Catalyst from High Activity Stability CARC Catalyst LS...
Two-component waterborne polyurethane. MIL-DTL-64159B, Type II coatings are two-component waterborne polyurethane chemical agent resistant coatings (CARC) for military equipment....
MIL-DTL-64159C Type II 2K Waterborne Polyurethane CARC Aircraft Green 34031 Q1661 Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II F93G505 SECTION 2:...
• Smooth finish versus standard CARC • preparation, coatings, and application. May be applied with two component equipment • Free of lead and chromate hazards • Excellent exterior...
Care Catalyst. Care Catalyst was specially developed for use with M.L. Campbell ® PostCatalyzed systems. Size. Choose an option 1 Gallon 5...
This catalyst is using the latest technology of substrate preparation, increasing channel of substrate and pore volume of catalysts, promoting inferior cracking of macromolecular...












