Products

1. The PRT semi-regenerative reforming catalyst has excellent characteristics such as high carrier purity, suitable pore distribution, good strength and strong chlorine holding capacity;
2....

1. The main purpose of sulfur recovery tail gas hydrogenation SCOT catalyst is to reduce the total sulfur emission of sulfur tail gas stack;
2. It has large surface area and pore volume,...

1. The CO high temperature shift catalyst is an iron-chromium-based(±Cu) sulfur-tolerant shift catalyst;
2. It has higher activity and stability;
3.It can be applied to the CO...

1.Steam reforming catalyst is highly dispersed active component nickel
2.It is light black gray green with four-hole convex cylindrical
3.Gas material:various refinery dry gas,...

1.Steam reforming catalyst is nikel oxide catalyst on alpha alumina carrier or calcium aluminate carrier
2.The shape of 4-hole cylinder with dome provides it with large external geometric...

1. MTBE Etherification strong acid catalyst is macroporous styrene series strong acid cation exchange resin;
2. It has suitable pore structure, specific surface area and catalytic...

1. C4 C5 C6 Low temperature light hydrocarbon isomerization catalyst is prepared by using precious metal Pt supported on alumina chloride carrier;
2.It has the advantages of high...

1.Magnesium oxide for plastic can improves thermal conductivity of plastics.
2.It has good heat resistance and high temperature resistance.
3.High mobility, good compatibility with...

1.Magnesium oxide is non-toxic and odorless, can be used as magnesium supplements.
2.Food grade magnesium oxide produced by Avant is superior to national standards.
3.Stable physical...

Hydrocracking Catalyst For Medium Oil has characteristics as below:
● High activity
● High selectivity
● Good stability
● Good sensitivity

FC – 14 catalyst is a highly active hydrocracking catalyst that was developed by Fushun Petrochemical Research Institute.

Ceramics with magnesium oxide as the main component. It is cubic crystal system, NaCl type structure. The melting point of pure magnesium oxide is 2800℃±13℃. Its Mohs hardness is 6, tensile...