Low Impurity Insulating Al2O3 Aluminum Oxide Hpa High Purity Alumina for Lithium-Ion Battery Electrodes Separator
High purity alumina, uniform particle size, heat resistance, easy dispersion, good sintering performance. Due to its high melting point and high thermal stability, high purity alumina can be used as raw material for Lithium-Ion Battery Electrodes Separator.
Product Introduction
Nowadays, we're hoping our best to be certainly one of the top exporters in our area to satisfy consumers additional will need for Molecular Sieve For Drying Natural Gas, deepth drying, Aluminum Hydroxide For Flame Retardant. Our company has grown into brand-new business philosophy, scientific management system, advanced production equipment, and skilled manufacturing technology. The company has modern assembly line and testing equipment, assuring both production efficiency and strict quality control. Our company has complete production equipment and a team of highly qualified professionals in various fields including design, manufacturing, and product quality control through years of unremitting efforts. All prices depend upon the quantity of your respective order; the extra you purchase, the extra economical the rate is.
Product Introduction:
HPA For Lithium-Ion Battery Electrodes Separator is a white crystalline powder. High purity alumina refers to ultra-micro powder material with a purity of 99.99% or more and uniform particle size, which is porous, highly dispersible, insulating and heat resistant.
The application of HPA For Lithium-Ion Battery Electrodes Separator in the surface coating of materials such as lithium cobaltate, lithium manganate, lithium titanate and lithium iron phosphate can also significantly reduce the interfacial impedance and provide additional electron transport channels, thus effectively preventing the electrolyte from corroding the electrolyte. In addition, it can accommodate changes in particle volume during Li + de-embedding to prevent damage to the electrode structure.
Product Specification:
| Item | Al2O3 | D50 | Na |  Fe | Si | Cu | Mg | Ti | Cr | Mn | Zn | Pb | Ni | Surface Area |
| ≥ % | um | ppm | ppm | ppm | ppm | ppm | ppm | ppm | ppm | ppm | ppm | ppm | ㎡/g | |
| AM-LS-001 | 99.9 | 0.3-0.4 | 200-300 | ≤60 | ≤70 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | 5.00 |
| AM-LS-002 | 99.9 | 0.6-0.9 | 200-300 | ≤60 | ≤70 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | 5.00 |
| AM-LS-003 | 99.9 | 0.3-0.4 | 30-40 | ≤60 | ≤70 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | 5.00 |
| AM-LS-004 | 99.9 | 0.6-0.9 | 30-40 | ≤60 | ≤70 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | ≤1 | 5.00 |
Performance requirements of HPA For Lithium-Ion Battery Electrodes Separator:
1) Uniform particle size, which bonds well to the diaphragm without blocking the diaphragm aperture.
2) High purity, which cannot introduce impurities that could affect the internal environment of the battery.
3) The requirements of the alumina crystal structure to ensure the compatibility and wettability of the alumina to the electrolyte.
Advantages of Lithium-Ion Battery Electrodes Separator with HPA:
1) High temperature resistance
The alumina coating has excellent resistance to high temperatures, maintaining the diaphragm intact above 180 degrees Celsius.
2) High safety
The alumina coating can neutralise free HF in the electrolyte, enhancing the acid resistance of the battery and improving safety.
3) High multiplicity
Nano alumina can form solid solution in lithium batteries, improving multiplicity and cycle performance.
4) Good wettability
Nano alumina powder has good liquid absorption and retention ability.
5) Unique self-closing characteristics
The closed pore characteristics of the polyolefin diaphragm are maintained to avoid safety hazards caused by thermal runaway.
6)Low self-discharge rate
The alumina coating increases the curvature of the micro-pores, resulting in lower self-discharge than ordinary diaphragms.
7) Long cycle life
Reduced mechanical micro-short circuits during cycling, effectively enhancing cycle life.
In the spirit of 'your needs, our innovation,' we focus on developing Low Impurity Insulating Al2O3 Aluminum Oxide Hpa High Purity Alumina for Lithium-Ion Battery Electrodes Separator. We are proud of quality products that meet customer needs. We embrace various businesses with people worldwide. We constantly look to improve ourselves and refine our approaches to enhance your experience. We are constantly adjusting our development direction based on market demand and strive to produce more high-quality products. Our company strives for the development by the unceasing innovation and creates the good achievement by the legal management.
Hot Tags: hpa for lithium-ion battery electrodes separator, China, manufacturers, suppliers, factory, wholesale, price, HPA For Synthetic Sapphire, Aluminum Hydroxide For Adhesive, 3A ZMS For Drying, Alumina glass polishing material, MTBE Etherification Strong Acid Catalyst, Carbon Silica Molecular Sieve
You Might Also Like
Send Inquiry