China Highly Reactive Adsorbent Catalyst Zeolite 3A/4A/5A/13X Molecular Sieve Supplier

The quality of our device drying media, regenerative heat drying, Activated Alumina Claus Catalyst represents the survival of the enterprise and the production represents the progress of the enterprise. We take safety and efficiency as the management objectives, strengthen the bottom line principle, establish and improve the safety management system and risk prevention and control mechanism. By establishing the common enterprise concept, enterprise spirit and values among the employees, we can enhance the cohesion of the enterprise and devote ourselves to the service for customers with full enthusiasm. We will be realistic and sincere, ushering in a brilliant, socially rewarding and user-contributing company.

Production Introduction

It can adsorb molecules smaller than its pore diameter into the interior of the hole, while repels molecules larger than the pore diameter out of its hole, playing the role of screening molecules.

Compared with other types of desiccants or adsorbents, zeolite molecular sieve still has higher adsorption capacity under low partial pressure and high temperature conditions, and the adsorption rate of polar molecules such as water is also higher at low partial pressure or concentration.

Zeolite molecular sieves are widely used in air purifiers of cryogenic air separation units in the adsorption function. In traditional cryogenic air separation, before the raw air enters the cryogenic separation process, moisture, small molecular impurities, carbon dioxide, etc. in the gas need to be filled. The air purification system of it is used to remove clean air, and then through various regeneration methods, the service life of molecular sieve is prolonged, energy saving, consumption reduction and cost reduction.

Specification:

Item	Unit	Specification
Sphere Size	mm	1.8-2.5	3.0-5.0
Bulk Density	g/ml	≥0.67	≥0.65
Qualified Size	%	≥98	≥98
Static Absorptive Water	%	≥26.5	≥26.5
CO2 Absorptive Capacity	ml/g	≥17.5	≥17.5
Crush Resistance	N	≥35	≥80
Abrasion Loss	wt%	≤0.2	≤0.2
Packing Moisture Content	%	≤1.5	≤1.5

Regeneration:

It can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. To remove moisture from a molecular sieve, a temperature of 250-300°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C, or mercaptan or CO2 levels below 2 ppmv. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.

Application

①　Gas purification in the air separation device to remove water and carbon dioxide.

②　Drying and desulfurization of natural gas, liquefied petroleum gas and liquid hydrocarbons.

③　General gas deep drying.

Also includes: removal of hydrocarbons; drying and purification of ammonia synthesis gas; desulfurization and deodorization of aerosol propellants; de-CO2 from cracked gas; catalyst carrier; co-adsorption of water and carbon dioxide; co-adsorption of water and hydrogen sulfide gas, etc...

Lab Test

Package

①　25 kg kraft bag with plastic double lining;

②　25kg carton wish foil;

③　125 kg/140 kg/180 kg paper drum;

④　125 kg/140 kg/180 kg steel drum;

⑤　Tog bag;

⑥　Customer's request.

We use advanced professional production equipment to test our China Highly Reactive Adsorbent Catalyst Zeolite 3A/4A/5A/13X Molecular Sieve Supplier and ensure that they are in a high energy state. Besides, all of our solutions have been strictly inspected before shipment. Our company will become the leader of global e-commerce and the main force of the industry.

Hot Tags: zeolite molecular sieve, China, manufacturers, suppliers, factory, wholesale, price, Alumina For Nano Ceramic Coating, 3A ZMS, Activated Alumina Hydrogen Peroxide Regeneration, 4A Zeolite Molecular Sieve For PSA Device, Alumina Ceramic, CARC Catalyst