Aluminium Trihydrate Filler
1.Aluminium trihydrate filler is white powder with high whiteness and good fluidity.
2.Environmentally friendly, no toxic and corrosive gases are produced during pyrolysis.
3.Uniform particle size distribution and good dispersion.
Product Introduction
Product Introduction:
Aluminium trihydrate filler is non-toxic, non-volatile, non-precipitating and inexpensive, etc. It also has good flame retardant, smoke dissipation function and relatively low decomposition temperature, and has good flame retardant matching with a variety of polymers such as rubber, plastic, epoxy resin, etc.
It is an inorganic flame retardant with the largest dosage, and is widely used in thermosetting materials and synthetic rubber, which can not only reduce the production cost of materials, but also improve It can not only reduce the production cost of materials, but also improve the rigidity, hardness and dimensional stability of materials, as well as give materials some special physical and chemical properties, such as corrosion resistance, flame retardancy and insulation properties.
Production method of aluminum trihydrate filler:
The preparation of aluminium trihydrate filler (5μm < D50 < 25μm) is currently used to crush coarse-grained alumina method. According to different equipment principles, it can be divided into airflow impact crushing (airflow mill), mechanical impact crushing (mechanical mill), and grinding body impact crushing (ball mill). The airflow mill is an airflow pulverizer equipped with a classification structure above the interior. The raw material is added through the spiral feeder, relying on the jet effect of the nozzle to attract material to the inner cavity of the crusher, through the nozzle nozzle emits supersonic airflow, the raw material is accelerated to high speed in the accelerating tube, and is impacted on the impact surface. After the impact of the material in the high-speed rotating airflow and the material itself under the action of mutual friction to achieve the purpose of crushing.
Product Specification:
ATH | Spec % | Oil Absorption | Whiteness | Particle Size | Moisture | Lg Loss | ||||
Grade | Al(OH)3 ≥ | SiO2 ≤ | Fe2O3 ≤ | Na2O ≤ | Na2O(S) ≤ | ml/100g ≤ | ≥ | D50 um | ≤ | |
LJ-HW-8/10 | 99.6 | 0.02 | 0.02 | 0.3 | 0.03 | 30 | 98 | 10±2 | 0.2 | 34.5 |
LJ-HW-14 | 99.6 | 0.02 | 0.02 | 0.3 | 0.03 | 28 | 98 | 14±2 | 0.2 | 34.5 |
LJ-HW-25 | 99.6 | 0.02 | 0.02 | 0.3 | 0.03 | 20 | 97 | 20±5 | 0.2 | 34.5 |
LJ-HW-45 | 99.6 | 0.02 | 0.02 | 0.3 | 0.03 | 22 | 94 | 45±10 | 0.2 | 34.5 |
LJ-HW-75-90 | 99.6 | 0.02 | 0.02 | 0.3 | 0.03 | 22 | 94 | 75±30 | 0.2 | 34.5 |
LJ-NW-8/10 | 99.6 | 0.02 | 0.02 | 0.3 | 0.03 | 20 | 92 | 10±2 | 0.2 | 34.5 |
LJ-NW-25 | 99.6 | 0.02 | 0.02 | 0.3 | 0.03 | 20 | 90 | 20±5 | 0.2 | 34.5 |
LJ-NW-75/90 | 99.6 | 0.02 | 0.02 | 0.3 | 0.03 | 20 | 83 | 75±30 | 0.2 | 34.5 |
LJ-HP-G030 | 99.6 | 1ppm | 1ppm | 0.15 | - | 20 | 98 | 35±5 | 10 | 34.5 |
Packing&Storage:
●20kg/25kg kraft bags or woven bags or ton bags packed, also can be customized according to specific requirements.
●The product is non-dangerous, prevent from moisture, rain and package breakage during transportation.
●Store in a dry and ventilated warehouse.
Hot Tags: aluminium trihydrate filler, China, manufacturers, suppliers, factory, wholesale, price, Aluminium Trihydrate Filler, Ground Aluminum Hydroxide, Ultrafine Aluminum Hydroxide, High Whiteness Aluminum Hydroxide, Aluminum Hydroxide, Aluminum Hydroxide For Surface Treatment
You Might Also Like
Send Inquiry
