Catalyst

Catalytic cracking raw materials Catalytic cracking raw materials come from a wide range of sources, 350~500℃ straight distillate, atmospheric residual oil and reduced pressure residual oil into the s

Catalytic reforming catalysts are loaded catalysts, i.e. the metal component is loaded onto a pot aluminium oxide modified with halogen. It consists of three main components: the active component, the

Alkanes (olefins) undergo hydrocracking process, mainly cracking, juxtaposition and a small amount of cyclization reactions. hydrogenation under high pressure to produce low-molecular alkanes, includi

A. Formation of fluidized bed 1. Fluidization concept and formation of fluidized bed conditions (1) Fluidization: Solid particles suspended in a fluid in motion is called fluidization of solids, refer

The exhaust from the turbine enters the water receiver and condenses. The heat released is removed by the cooling water and the volume of the steam shrinks dramatically as it cools. There is always a

Raney nickel catalysts have significant thermal and structural stability, as well as already having a large surface area. The direct result of these properties is to allow the catalyst to contribute t

The strong adsorption of hydrogen, the high catalytic activity and the thermal stability make Raney nickel widely used in many industrial processes and organic synthesis reactions. In addition to this

The production of hydrogen peroxide by anthraquinone is one of the most mature production methods in the world, and domestic and foreign manufacturers basically use the anthraquinone method to produce

Alloy Preparation: Commercially, the nickel-aluminum alloy required to produce Raney nickel is prepared by fusing catalytically active metals (nickel, iron or copper) with aluminum in a furnace, the r

Pressure Swing Adsorption (PSA) technology is a comprehensive technology that can separate multiple gases. It works by using an adsorbent to extract the desired gas from it through controlled temperat

1.Conditions to be met and matters to be confirmed before filling the catalyst 1)Confirm that the metal mesh of the outlet collector is intact. 2) The thermocouple protection tube is intact. 3) The bl

Catalytic cracking is one of the most important heavy oil lightening processes. The catalytic cracking process is a major source of refinery profits due to its low investment, low operating costs, hig