Good price of Antispalling alumina bricks applied in cement safety zone DDR series

With many years experience in manufacturing Alumina Lining Plate wear-resistance, Activated Alumina Adsorbent, 4N HPA, we believe that our technical expertise is matched by our production capability, providing our customers with the highest quality products and a first-rate service. Our company has a complete quality inspection system, strict management procedures, advanced testing equipment and methods. From the raw material entering the factory to the product leaving the factory, every link is strictly tested to ensure product quality and make users satisfied and assured. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We believe that the success of the company stems from our respect and responsibility to shareholders, employees, all partners and society.

Characters

According to different use requirements, activated alumina for gas drying generally has particle size specifications that can adapt to different reaction conditions and equipment shapes, high mechanical strength and large adsorption surface area.

1) Particle size specification

Activated alumina powder for gas drying is generally 10 microns to 50 microns; Spherical particles are generally divided into 1-3 mm, 2-3 mm, 3-5 mm, 4-6 mm and 5-8 mm, etc.; 

All are white dry adsorbents.

2) Bulk density

The bulk density of activated alumina for gas drying varies depending on particle shape, size, activation conditions, and manufacturing methods. Generally 0.4~0.9 kg/L.

Generally, the larger the pore size of the product, the lower the bulk density.

3) surface area

All good adsorbents have a certain surface area.

The surface area of the activated alumina for gas drying also varies greatly with the use requirements and preparation methods, ranging from 100 m2/g to 400 m2/g.

4) Mechanical(Crushing) strength

Mechanical strength is an important indicator of granular adsorbents in use. Activated alumina for gas drying not only has high mechanical crushing strength and wear resistance, but also has high volume integrity after immersion and water absorption.
These properties are far superior to silica.

5) Pore volume

The pore volume of activated alumina for gas drying depends on its pore size and the sintering state of fine pores.

According to the pore size: the small pore size is 20Å, and the large pore size is 40Å~50Å. The corresponding pore volume is generally between 24 and 37 cm3/g.

 

Conditions of Using

On the other hand, the use of activated alumina for gas drying, whether placed after purchase or in specific applications, should be carefully noted, so as to improve the adsorption capacity of the product.

1. Don't open the package of activated alumina for gas drying before use, so as not to absorb moisture and affect the use effect.

2. It's suitable for deep drying under conditions of pressure greater than 5 kg/cm2.

3. After a certain period of use, the adsorption performance of activated alumina for gas drying will gradually decline. The absorbed water should be removed through regeneration in order to repeatedly use the gas in the regeneration operation:

(1) Dry gas with lower or the same pressure than in drying operation.

(2) A dry gas with higher or the same temperature than the drying operation.

(3) The heated wet gas;

(4) Wet gas after decompression.

The product that uses activated alumina for gas drying necessarily has requirement to dry humidity.

Technical Index

Chemical analysis:	Al2O3	≥92	≥92	≥92	≥92	%
	SiO2	≤0.10	≤0.10	≤0.10	≤0.10	%
	Fe2O3	≤0.04	≤0.04	≤0.04	≤0.04	%
	Na2O	≤0.45	≤0.45	≤0.45	≤0.45	%
Physical properties:
Static adsorption		18±1	18±1	18±1	18±1	Wt%
Adsorption rate(water)		≥50	≥50	≥50	≥50	≥50
Bulk density		≤0.72	≤0.72	≤0.72	≤0.72	g/ml
Surface area		≥300	≥300	≥300	≥300	m2/g
Pore volume		≥0.40	≥0.40	≥0.40	≥0.40	ml/g
Crushing strength		≥150 3-5mm	≥180 4-6mm	≥220 5-7mm	≥240 6-8mm	N/Granule

Application

Our company has strong new product development ability and fast response ability and advanced international design concept, we closely follow the development of new technology in the world, and launch all kinds of high performance and high reliability Good price of Antispalling alumina bricks applied in cement safety zone DDR series. We look forward to a win-win cooperation in the field of new technologies through extensive external exchanges and cooperation. We do not forget our original intention, forge ahead, and continue to develop high-end and advanced products to meet the diversified and all-round needs of customers and the market.

Hot Tags: activated alumina for gas drying, China, manufacturers, suppliers, factory, wholesale, price, drying media, CAS 1344 28 1, High Activity Heavy Oil RFCC Catalyst, Alumina For Lithium Battery Separator Coating, Catalyst Auxiliary for FCC, Molecular Sieve For Drying Natural Gas